Blog

Name is Anant Dubey and the intent to create this blog is to discuss the problems and issues that developer face in the dynamics AX development and to share the new things that come up with the new version of AX.

Wednesday, 18 November 2015

Event Handling in Microsoft Dynamics AX 2012

Today, I am going to talk on the event handling mechanism in Microsoft Dynamics AX 2012. With the event-handling mechanism in Microsoft Dynamics AX 2012 you can lower the cost of doing development and then upgrading these customizations.
Events are a simple and yet powerful concept. In daily life, we encounter with so many events. Events can be used to support these programming paradigms.
  • Observation: Generate alerts to see exceptional behavior.
  • Information dissemination: To convey information to right people at right time.
  • Decoupling: The consumer doesn’t need to know about the producer. Producer and Consumer can be sitting in totally different applications.
  • Terminology: Microsoft Dynamics AX 2012 events are based on .NET eventing concepts.
  •  
  • Producer: Object to trigger the event.
  • Consumer: Object to consume the event and process logic based on the event triggered.
  • Event: An action that needs to be triggered
  • Event Payload: Information that can go along with event.
  • Delegate: Definition that is passed to trigger an event. Basically, communicator between producer and consumer
Things to remember while using Events in AX2012
  • Delegate keyword to use in delegate method.
  • Public or any other accessibility specifier is not allowed in a delegate method.
  • Delegate Method return type must be void.
  • Delegate Method body must be empty.
  • A delegate declaration can have the same type of parameters as a method.
  • Event handlers can run only on the same tier as the publisher class of the delegate runs on.
  • Only static methods are allowed to be event handlers.
  • Delegate method can’t be called outside class. Basically, events can’t be raised outside class in which event is defined.
  • Event handlers for host methods can use one of two parameter signatures:
    • One parameter of the type XppPrePostArgs. Go through all the methods available in XppPrePostArgs.
    • The same parameters that are on the host method that the event handler subscribes to.
Now, let’s talk about how to use events in Microsoft Dynamics AX 2012.
  1. Let’s create a class Consumer to create EventHandler (sendEmailToCustomer). This will be called once order is shipped so that email can be sent to customer to notify. It has to be static method.
  2. Now let’s create Producer class where this event (sendEmailToCustomer) is called using Delegates. Add delegate by right clicking on Producer class > New > Delegate.
  3. Change its name to delegateEmail (you can have any name). Parameter should be same as event handler method (sendEmailToCustomer) i.e. of type Email. Notice it has no body and is a blank method.
  4. Now drag and drop sendEmailToCustomer method from Consumer class to delegateEmail
  5. Look at properties of EventHandler. You will notice it is pointing to Class Consumer and method sendEmailToCustomer
  6. If order is not shipped, I am creating another event handler (errorLog) in Consumer class to log error into error log.
  7. Create another delegate method (delegateErrorLog) in Producer class to call this event handler (errorLog)
  8. Drag and drop event handler (errorLog) in delegate method (delegateErrorLog) similar to step 4.
  9. Now let’s create main method in Producer class to ship order and let’s see how delegates can be used to trigger event handlers.
  10. Suppose shipOrder method returns true. Now, if I run this main method, it should go into delegateEmail method and should trigger method sendEmailToCustomer. Let’s run and see the result.
  11. Here is the result and it is as expected so it did trigger method sendEmailToCustomer.
  12. Let’s suppose shipOrder method returns false. Now, if I run this main method, it should go into delegateErrorLog method and should trigger method errorLog. Let’s run and see the result.
  13. Here is the result and it is as expected so it did trigger method errorLog.
  14. Handlers can also be added or removed
    Add Handler: It uses += sign.
    Remove Handler: It uses -= sign.
  15. Now, let’s use addStaticHandler in main method. If you see the code, it is calling addStaticHandler before calling delegate method. If we run it and see the result, it should send 2 emails.
  16. Here is the result as expected.
  17. Similarly if we use removeStaticHandler method instead of addStaticHandler before calling delegate method then it will remove handler and will not send any email.
So, you can see that with the use of delegates and event handlers, it is so easy to trigger events. Also, it will be easy and less time consuming to upgrade it. Suppose if delegates are called from standard methods while doing customizations then it will be so easy to upgrade if standard methods are changed in next release because only 1 liner code of calling delegate method needs to be rearranged and no changes will be required in event handler methods.
Use of Pre and Post event handlers
In Microsoft Dynamics AX 2012, any event handler method can dropped in other method. If the property "CalledWhen" is set to "Pre" then it becomes pre event handler. If it is set to "Post" then it becomes post event handler. Pre event handler is called before the method under which it is dropped and Post event handler is called after method ends. These are so powerful that event handler method can be created in new class and can be dropped in any standard or any other method without changing a single line of code and can be set as pre or post event handler as per business need. Suppose, before creating a customer in AX, business need is to do some business logic then logic can be written in pre event handler and can be dropped in insert method of CustTable. Similarly, if there is post logic to be written after customer is created then post event handler can be created and dropped in insert method of the Customer Table (CustTable).
Let’s see how pre and post event handler methods can be created and used.
  1. Let’s take same example. I added 2 event handler methods in Consumer class.
  2. Drag and drop both these event handlers in method sendEmailToCustomer
  3. Set property "CalledWhen" to Pre for EventHandler1 and Post for EventHandler2.
  4. Now let’s run main method of Producer class again and see the results. It should call EventHandler1 and then sendEmailToCustomer and then EventHandler2.
  5. Here is the result as expected.
With use of events, it has opened so many doors and possibilities. Model architecture and events can be integrated which can help if multiple vendors are doing customizations in different models so that it doesn’t impact customizations of other models/vendors. Use of pre and post handlers is so powerful that it can be used without changing a single line of code in original method. Pre or Post handlers can be just dropped in the original method and will be called automatically before (pre handler method) or after (post handler method) original method.
Stay tuned for more technical tips on Microsoft Dynamics AX 2012.

Tuesday, 17 November 2015

How to call .exe (executable) file through code in ax 2012

Here I am calling .exe file through AX 2012. What I have done in this is created a Crystal report of AX and make it in .exe format. Now I am calling this through AX 2012 R3.

static void Callingcrystalreport(Args _args)
{
    WinAPI::shellExecute("D:\\BN\\WindowsFormsApplication2.exe");
}

Generate Report through code in ax 2012

In this post I am trying to automatically save report to any format in the shared drive.
report is generating based on parameters, after this we can check in the drive that report is stored in the drive.



static void GenerateReportThroughCode(Args _args)
{
    S3_WHSVariantTable        S3_WHSVariantTable;
    InventItemBarcode         inventItemBarcode;
    ReportRun                 reportRun;
    ;
        select inventItemBarcode where inventItemBarcode.itemBarCode == '4015400548485';
        reportRun = new ReportRun(new Args(ReportStr(S3_DP_RetailLabel_BN)));//where S3_DP_RetailLabel_BN is Morphx Report
        reportRun.args().caller();
        //reportRun.args().parm(itemId);
        reportRun.args().record(inventItemBarcode);
        // reportRun.args().object(List);
        //reportRun.printJobSettings().runServer();
        reportRun.printJobSettings().setTarget(PrintMedium::File);
        reportRun.printJobSettings().format(PrintFormat::PDF);
        reportRun.printJobSettings().fileName(strFmt(@"\\SERVERNAME\FolderName\Barcode\%1.pdf",inventItemBarcode.itemId));
        // reportRun.printJobSettings().outputToClient(true);
        // reportRun.printJobSettings().clientPrintJobSettings();
        reportRun.run();
}